Smart City IoT Box

Contributing Towards the Saudi Arabia’s Smart Cities vision,
LTS is offering various smart monitoring and management solutions

All-in-One IP67 Smart City Box

LTS Smart City IoT is a fully equipped & integrated communication system within an IP67 enclosure for Smart City and Industrial Internet of Thing (IIoT) applications.

The Gigabit 802.3bt ultra PoE/802.3at PoE+ ports, Fiber SFP, Serial, Voice, DI, DO are protected by weatherproof cable gland connectors. It is greatly flexible with different power in/out sources, internal USB, SD , Ethernet and mPCIe socket for wireless expansion. Comparing with traditional cabinets, the our solution save you a lot of time and cost for system integration.

Read more

Supports Connectivity and Smart Management of

Smart Street Lighting

CCTV Surveillance

Digital Signage

Wifi Hotspot

Alarms / Alerts

Speeding Cameras

Air Quality Sensors

Smart Unified Audio & More…….!

Applications

Serial: It’s able to connect with various water sensors, SCB supports Industrial Modbus communication protocol which provides the efficiency of connectivity.

The used Sensors as follows:

Electrical Conductivity sensor
Dissolved Oxygen sensor
pH sensor
Temp. sensor

Read more

Weather Proof Environmental Sensors

Weatherproof Shelter for Dust / Rain

Multiple sensor parameters

Integration of independent and high sensibility parameters

2-wire RS485 standard Modbus-RTU protocol for high compatibility

Integration With Smart City Box

24VDC power output from SCB Plug and Play

Sensor device address modification

  • Various configuration paths, including WebGUI, CLI SNMP, LAN Utility (ViewMaster), and NMS
  • ViewMaster Utility, Remote configuration so-ware utility
  • Redundancy: WAN to LTE redundancy
  • Diagnostic tool includes Radio LED, Ping, TFTP, SNMP Trap, E-mail Alert and System Log
  • LTE watchdog, auto-reconnect cellular connection

ITU-T G.8032 v1/v2 ERPS Ring Redundancy

  • An ITU standard Ring Redundancy Protocol
  • Provide sub-50ms protection and recovery switching for Ethernet traic
  • Interoperate with 3rd party industrial switches and enhance recovery time STP/RSTP
  • Eicient network interconnection and topology with ERPS chain, multiple chains

Full system integration with IP67 enclosure for outdoor applications

  • 4 high power PoE with management to connect to cameras
  • 1 Giga WAN port for network, USB for configuration and SD slot for storage
  • Audio interface to connect the Speaker and Microphone
  • Fiber uplink with ERPS Ring support to provide network resilience
  • LTE and WiFi support as hot spot
  • local RS232 interface and Lora support for IoT devices
  • Flexibility power input source including AC or DC power input, two external 24V
  • DC output and optional PV input for solar panels

60W Ultra PoE for Digital Signage / Smart Street Lighting

  • 2 Giga Ultra PoE 802.3bt Ports with 60W/per port
  • 2 Giga PoE+ 802.3at Ports with 30W/per port
  • 1 internal PoE+ 802.3at WAN port for VPN, NAT, Routing Expansion
  • PoE Enable/Disable, Budget Control, Port Control, Port Priority, PD Alive Check and port status
  • Max. 240W power budget for PoE & DC Output

Weatherproof IP67 Enclosure and cable gland connectors

  • Four Giga PoE ports
  • Two 100/1000M Fiber SFP slots
  • SCB1200 only
  • One RS232/422/485 RJ-45 port
  • One Audio RJ12 port
  • Two Digital Inputs
  • Two Relay Outputs
  • Weatherproof M12 connector
  • Two DC24V outputs
  • One AC100~240V Input
  • Internal One RS232/422/485 DB9 port
  • Internal One USB, and One SD socket for Storage

VoIP Voice Broadcast

  • RTSP voice streaming Server/Client for VoIP broadcast
  • 1 to N VoIP broadcasting

Optional Basic Solar Kit

  • 54V Battery Charge Control board for Solar power input
  • Typical 48V/2.5AH Battery for power shortage
  • Management Interface for Battery Status

Optional Wireless Expansion

  • mPCIe & SIM socket for wireless expansion
  • SCB LTE Module and Antenna Kit
  • LTE Cat.4/6 Cellular Module
  • LTE+GPS Antenna on the top of the box
  • 300M(Cat.6)/150M(Cat.4) Downlink, 50M Uplink, FDD/TDD-LTE
  • SCB Industrial WLAN Module
  • N-Type Antenna Socket on the top of the box
  • 5G/2.4G Qualcomm IEEE 802.11ac 2T2R MIMO, up to 866Mbps
  • WLAN AP/CPE mode

VoIP Voice Broadcast

  • RTSP voice streaming

Server/Client for VoIP broadcast

  • 1 to N VoIP broadcasting

Optional Basic Solar Kit

  • 54V Battery Charge Control board for Solar power input
  • Typical 48V/2.5AH Battery for power shortage
  • Management Interface for Battery Status
Contact our Support and Sales Team

At LTS we continuously work hard to improve the service and support we offer you, our customers.
Our aim is to make it easier for you to do business with us and improve your customer experience.

Contact Us